Dual dash speakers
are designed to fit original single factory location. We mount two 3.5
inch speakers in a
single frame to fit original opening. There's no
modification and it allows stereo sound performance.
There may also be a
location in the rear of your car for a factory speaker replacement...
New dual voice coil speakers offer the best sound in
you original speaker location. A large cone area gives better bass
response and handles 140 watt input. Both stereo channels
connect to this single speaker.
IMPORTANT:
**During Checkout of this item please include the Year, Make, and
Model of your Classic and whether or not your vehicle has air
conditioning in the Add Special Instruction
to Merchant portion of
your Paypal checkout.
NOTE: 3000 Series -
Screw mount only
4000 Series -
Bracketed/Screw Mount
Example - '62 Caddy 4 X 10 dual
assembly in the front
and 6 X 9 assembly between seats in the rear.
IMPORTANT:
**During Checkout of this item please include the Year, Make, and
Model of your Classic and whether or not your vehicle has air
conditioning in the Add Special Instruction
to Merchant portion of
your Paypal checkout.
IMPORTANT:
**During Checkout of this item please include the Year, Make, and
Model of your Classic and whether or not your vehicle has air
conditioning in the Add Special Instruction
to Merchant portion of
your Paypal checkout.
Speaker Pods allow you to mount speakers when you don't
have oem openings and don't want to make large holes. These ABS
pods can be painted or upholstered. Coaxial speaker and wires
optional.
Customautosound Backseat Drivers Available for 64 1/2'-70'
Mustangs, 55'- 57' Chevy and Camaro, Chevelle, and Impala models.
Equipped with the Boss 400 watt amp and 2 - 8" subwoofers. NOT
AVAILABLE FOR CONVERTIBLES
IMPORTANT:
**During Checkout of this item please include the Year, Make, and
Model of your Classic and whether or not your vehicle has air
conditioning in the Add Special Instruction
to Merchant portion of
your Paypal checkout.
Undercover speakers - designed to fit "underseat" or
"wall" or "parcel shelf" locations. Contains a 5 1/2" woofer
and two piezo tweeters in a unit only 3" high by 8¼
"x11¼".
Suitable for most pre-78' classics
Want a little more capacity and kick?
Undercover II Speakers with 8" woofer and 2 piezo tweeters in each
box A little larger than the regular Undercover speakers at 11" x 12½" x 2.95" But will still mount in many of the same locations.
Universal Bass Ported Soundbar
A great sound solution. Designed to fit any
overhead, or against rear horizontal panel of your '63 - '82
Corvette (Will Not Work in Convertibles).
Dimensions of Soundbar:
5ft Wide (Can be modified to about 3 1/2 ft)
3" deep and 7" high.
The middle piece can be modified to bring the
width dimensions in by approx. 1/2 ft.
There is a Corvette logo for the Corvette's in the middle -
between
both sets of 3 speakers
Featuring 200 watt power handling!
$99.95
1947-53 Chevrolet Truck and
GMC Truck Speaker Kit
Mounts in
original location using existing mounting holes!
Includes
dash wiring harness for radio lights, power, and up to 2
additional speakers!
Two 5x7"
quality 3-way speakers in the same opening as the
original single 6x9" speaker!
All
installation hardware and instructions included!
**Check out our
Repro Radio page for a
matching radio.
BTA10100 - BT
Series 10 inch 100 watt Amplified Tube
Model #:
BTA10100
As
all in one solutions go, you simply can’t beat the
A100 Amplified Bass Tubes by Bazooka. Designed to be
a simple-to-install, yet effective upgrade to your
car’s existing mobile audio system, the A100 Bass
Tubes feature a 100 watt, 2-channel amplifier built
right in, coupled to a dual voice coil woofer. Since
the amplifier has a built in crossover to remove the
high frequencies the woofer cannot play from the
signal, you get exactly what you need in the
A100’s—crisp, clean bass and nothing more. When
connected to your system, the end result is seamless
integration, both electrically and audibly, yielding
sound quality your factory autosound system simply
can’t touch.
The BTA10100 features a 10 inch dual voice coil
subwoofer, and is the biggest A100 subwoofer we
build. The 10 inch works great in the trunks of
sedans or hatchbacks. Simply point it into the rear
corner to take advantage of the Bass Tubes Enclosure
, and you’re rockin’ in no time!
Use our F.A.S.T. harnesses to make installation
even easier! At $49, they’re an easy way to protect
your vehicle’s warranty by making installation a
simple, plug-in process. The T-shaped harness has 3
ends: 1 plugs into your car’s OE radio, 1 plugs into
the plug you removed from the OE radio, and the 3rd
end runs all the way back to the rear of the car and
plugs into your A100 Bazooka subwoofer. Great for
leased vehicles, the our F.A.S.T. systems are
available most popular cars.
The perfect accessory the BTA10100 is the RBCM,
allowing you to control the amount of bass from the
driver's seat, simply add the optional plug in Remote
Bass Control Module (RBCM)!
As with all Bazooka Bass Tubes Enclosures , the
BTA10100 comes with straps to keep the sub securely
mounted, while still making removal quick and easy
if you need even more cargo room. Optional
Chrome-Plated UMS Brackets give a flashier look, as
well as a more secure, permanent mounting when
removal isn't a problem.
BTA8200 - BT Series 8 inch 200 watt Amplified
Tube
Model #: BTA8200
Looking for some
GREAT Bass? Don't want to waste time and money
picking out components? Don't want to blow a whole
day installing it either? If you're not so cramped,
the BTA8200 may be just the ticket! If you’re one of
those people who have to have the highest
performance in everything you do, then the A200 Bass
Tubes are the ones for you. With a 200 watt MOSFET
amplifier, adjustable crossover, high power handling woofers, and
monstrous voice coils, these Amplified Bazooka’s will get things really
rumbling in your car.
The perfect accessory to our highest performance 8 inch Amplified Bass
Tube is the RBCM, allowing you to control the amount of bass from the
driver's seat, simply add the optional plug in Remote Bass
Control Module (RBCM)!
As with all Bazooka Bass Tubes Enclosures , the BTA8200 comes with
straps to keep the sub securely mounted, while still making removal
quick and easy if you need even more cargo room. Optional Chrome-Plated
UMS Brackets give a flashier look, as well as a more secure, permanent
mounting when removal isn't a problem.
BTA6100 - BT Series 6 inch 100 watt Amplified Tube
Model #: BTA6100
As all in one solutions go, you simply can’t beat the A100 Amplified
Bass Tubes by Bazooka. Designed to be a simple-to-install, yet effective
upgrade to your car’s existing mobile audio system, the A100 Bass Tubes
feature a 100 watt, 2-channel amplifier built right in, coupled to a
dual voice coil woofer. Since the amplifier has a built in crossover to
remove the high frequencies the woofer cannot play from the signal, you
get exactly what you need in the A100’s—crisp, clean bass and nothing
more. When connected to your system, the end result is seamless
integration, both electrically and audibly, yielding sound quality your
factory autosound system simply can’t touch.
The BTA6100 features a 6 inch dual voice coil subwoofer, and fits in
places most subs can’t. The 6 inch works great behind the seat of small
trucks, the trunks of sedans or hatchbacks. Simply point it into the
rear corner to take advantage of the Bass Tubes Enclosure , and you’re
rockin’ in no time!
Use our F.A.S.T. harnesses to make installation
even easier! At $49, they’re an easy way to protect
your vehicle’s warranty by making installation a
simple, plug-in process. The T-shaped harness has 3
ends: 1 plugs into your car’s OE radio, 1 plugs into
the plug you removed from the OE radio, and the 3rd
end runs all the way back to the rear of the car and
plugs into your A100 Bazooka subwoofer. Great for
leased vehicles, the our F.A.S.T. systems are
available most popular cars.
The perfect accessory the BTA10100 is the RBCM,
allowing you to control the amount of bass from the
driver's seat, simply add the optional plug in Remote
Bass Control Module (RBCM-100)!
As with all Bass Tubes Enclosures , the BTA6100
comes with straps to keep the sub securely mounted,
while still making removal quick and easy if you
need even more cargo room. Optional Chrome-Plated
UMS Brackets give a flashier look, as well as a more
secure, permanent mounting when removal isn't a
problem.
67-76 A Body
Baracuda, Dart Demon, Duster, Scamp,
Swinger, Valiant
Kick panel speaker assemblies are designed as a
replacement panel in your classic car or truck. This allows you to
save the original kick panel in "unaltered state" and add additional
sound with hideaway designs. Speakers are molded into ABS plastic that
replicates original kick panel assembly.
CAS Kick Panels
$129.95 pr.
Pioneer / Kenwood Kick Panels $189.95 pr.